​PRODRILL 20 

The ProDrill 20 is the middle drill in the range, but offers a wider choice of tapping sizes. This drill will tap from 3/4" to 2" and can also do 1/2" with additional adaptor. The ProDrill 20 will tap most common pipe materials and diameters up to 12" through a bossed tapping saddle. 

Live drilling with the ProDrill 20 is made easier when used in conjunction with our HTS saddles, thanks to their low profile design and built in slot for an isolation blade to be inserted. 

Rated to a working pressure of 16 bar on water and 4 bar on gas applications. The drill comes complete with the cutters and tooling for operation and maintenance. 
​Whats in the box:
  • ProDrill 20 pipe tapping machine.
  • 3/4", 1", 1,1/4", 1,1/2"  and 2" cutters and connectors. 
  • Pilot drill. 
  • Arbour for pilot drill. 
  • Adjustment tool. 
  • Hex key tool. 
  • 150mm and 300mm long extension rods. 
  • Swarf/pressure release valve. 
  • Manual. 
Technical Specifications
For more information please see downloadable TechSpec below.
ProDrill 20 TechSpec.pdf
File Size: 232 kb
File Type: pdf
Download File