CASCADE DETOUR ADAPTOR

The Cascade Detour Adaptor is designed to bolt on to valves to provide a bypass, this fitting can also be used an improvement process on existing lines by allowing a hydrant or washout point via the flanged outlet.

​The adaptors design also allows for the bolts to be reversed meaning that it can be torqued from behind the outer ring, instead of the conventional method. This allows the fitting to be installed in tight working environments or when the connecting pipe goes through a wall. 

​Cascade can fabricate these to order and sizes start at DN300 PN16 and up. 
Specifications 
  • ​Constructed from Carbon Steel. 
  • Fitted with WRAS approved EPDM. 
  • M16 Bolts.
  • Epoxy coated (WRAS approved).
  • Working pressure of 16 bar. 
For more information and specs please see below downloadable data sheet.